Barrel:
20” heavy contour, hand-lapped button twisted
rifled, fluted to reduce
weight and heat
4150 Mil-B-11595 chrome-moly-vanadium alloy (machine
gun rated)
70 Rockwell case hardened (Nitrate ) heat treated
“5R” polygonal
barrels are 2 times harder than Mil-Spec & hammer
forged barrels
Corrosion resistant and 10 times thicker and harder
than Mil-Spec chrome lining
“5R” polygonal right handed 1x10 twist hand-lapped
button rifled
barrels from Rock Creek Barrels, Inc.
POF-USA muzzle device
Chamber: 7.62 x 51 mm NATO (.308 Win)
Method
of Operation:
Gas piston operated, rotating bolt (short stroke
system)
2-position gas plug for normal (N) or suppressed (S)
operating modes
C.R.O.S.™ (Corrosion Resistant Operating System)
Nitrate heat treated: barrel, gas block/tube (billet
machined), gas plug
NP3™ coated (billet machined), gas piston chromed
(billet machined),
bolt carrier assembly NP3™ coated (one-piece billet
machined)
Bolt &
Carrier:
Nickel Teflon plated 8620 integral keyed steel
bolt carrier
(billet machined), heat treated/plated per Mil-Spec
Roller cam pin NP3™ coated
Chrome plated bolt, heat treated to Mil-Spec
Magazines:
POF-USA, C-Products, DPMS, Knight Armament, LaRue,
MagPul™
and the
original AR-10 waffle magazines
NP3™ Plating:
NP3™ is a combination of a nickel alloy plating
combined with
Polytetrafluoethylene aka Teflon. The plating
components with
electroless or autocatalytic nickel is one of the
most rapidly
developing metal finishing processes. The advantages
of coating
uniformity, corrosion resistance and hardness are
providing designers
with opportunities to protect and improve base
materials in ways that
were not previously possible.
|
Upper
Receiver:
POF-USA M.R.R.™ Modular Railed Receiver, billet
machined 7075-T6
aircraft aluminum alloy
2-piece upper receiver with free floating monolithic
top rail
Oversized heat sink barrel nut
A3 flattop: NP3™, Black anodized, O.D. green
CeraKote™
Charging handle: black anodized
Lower Receiver:
P308, GEN III billet machined 7075-T6 aircraft
aluminum alloy with
integral oversized trigger guard,
Ambidextrous bolt release lever machined into the
lower receiver
Tactical Integrated Trigger System 4.5 lb.
non-adjustable single stage competition trigger
group
KNS™ anti-walk pins
NORGON ambidextrous magazine release
Magpul™ MOE™ pistol grip and Magpul™ CTR™ buttstock
Olive Drab CeraKote™
Handguards:
ERGO™ ladder rail covers
Sling/Bi-pod mount
POF-USA M.R.R.™ Hunting/Sniper Modular
Railed Receiver
Sights:
optional
POF-USA FTA-2005 snag free front sight
TROY flip up front and rear sights
Diamondhead flip up front and rear sights
POF-USA
Specifications:
All raw materials are manufactured from U.S. steel
mills.
All heat treats, plating/coatings, are completed by
U.S. owned
and operated manufacturers.
All accessory and component parts on weapons systems
are U.S. owned and operated manufacturers.
All of our weapon systems are 100% pure American
made. |
