your search didn't produce any results
Revolution Buffer Tube
November 12, 2021
Our 6-position Buffer Tube ensures that the carrier is supported at all times. This prevents carrier-tilt and premature wear on the buffer tube and doubles as a lock that stops the buffer tube from rotating. POF-USA’s designing also features three (3) extra drain holes for marine environments.
read more
Revolution DI Upper Receiver
July 3, 2024
This receiver features a full picatinny flat-top and is compatible with Revolution and Rogue lower receivers. These uppers come with a U.S. Flag laser engraved ejection port cover and forward assist installed. Billet machined from 7075-T6 aluminum, this assembled upper is precision billet machined and features M4 feed ramps. POF-USA builds all Revolution DI rifles using this receiver.
read moreRevolution Ejector
October 2, 2024
OEM replacement part. It fits all Revolution and Rogue bolt assemblies designed for .308 WIN, 6.5 Creedmoor, and 6MM Creedmoor chambered Rifles. This part is not compatible with P-308 bolts or mil-spec AR-15 bolts.
read moreRevolution Ejector Spring
October 2, 2024
OEM replacement Revolution Ejector Spring. Recommended for annual Revolution rifle maintenance. This spring is only intended for use with Revolution, Rogue, and Prescott bolts.
read moreRevolution Extractor Kit
June 4, 2020
This parts kit is a complete rebuild kit for all Revolution and Rogue bolts. This kit includes an ejector spring, ejector, ejector retaining pin, extractor, extractor spring, and an extractor retaining pin. These parts are not compatible with mil-spec bolts.
read moreRevolution Extractor Spring
October 2, 2024
OEM Replacement Spring. This part is intended for use in all standard Revolution Extractors. This part is held in place inside the tail section of the extractor.
read moreRevolution Extractors
October 2, 2024
OEM replacement parts are available right here at the Patriot Store. Billet machined and Nitride heat treated, they are built to fit all Revolution, Rogue, and Prescott bolt assemblies.
read moreRevolution Firing Pin
October 26, 2020
OEM replacement nickel plated Firing Pin. Specifically designed for use with nitride heat treated V2 Revolution CMR/ Rogue LMR bolts.
read moreRevolution V2 Bolt
August 21, 2024
This Bolt works with all Revolution and Rogue rifles. The proprietary alloy used to manufacture the Revolution bolt has superior heat, pressure, and wear resilience over Mil-Spec bolt materials.
read moreRifle Length Op Rod For Revolution Rifles
June 4, 2020
OEM replacement Op-rods for Revolution PD upper receivers. This push rod is a rifle length 13.765" rod designed for use in 2016 or newer Revolution PD upper receivers.
read moreRogue Upper Receiver
July 3, 2024
This receiver features a continuous 1913 Picatinny top rail and comes with a U.S. Flag laser engraved ejection port cover. Forged from 7075-T6 aluminum, this assembled upper is precision machined and features M4 feed ramps. POF-USA builds all Rogue and Prescott rifles using this receiver. read moreRoller Cam Pin
June 4, 2020
Our patented Roller Cam Pin is another example of how far we will go to reduce friction and drag. The nickel-plated roller smoothly rolls along the receiver without gouging the receiver. As a result, you will never worry about cam slot wear again.
read moreRoller Cam Pin Upgrade Kit
June 4, 2020
Upgrade your bolt carrier with our Cam Pin Kit. These kits come complete with a Chrome plated notched gas key for use with Mil-Spec direct impingement AR-15 bolt carrier groups and an AR-15 Roller Cam Pim.
read moreSafety Selector Detent
June 4, 2020
Swapped out your pistol grip and lost your Safety Selector Detent? We've got you covered. This OEM replacement Mil-spec Safety Selector Detent is used in all P-308, P-415, P-15, PSG 22, Phoenix, Revolution, and Rogue lower receivers.
read moreSafety Selector Spring
June 4, 2020
Swapped out your pistol grip and lost your Safety Selector Spring? We've got you covered. Mil-spec Safety Selector Springs and Mil-spec AR-15 Ejector Springs are the same part.
read more
Shop
Showing 106–126 of 299 results
-
Revolution Buffer Spring
$8.25 $7.43
Add to cart
-
Magazine Catch
$10.00 $9.00
Add to cart
-
Handstop Kit
$93.00 $83.70
Add to cart
-
Pistol Buffer Tube
$85.00 – $86.00
$76.50 – $77.40
Select options
This product has multiple variants. The options may be chosen on the product page
-
Safety Selector Spring
$3.50 $3.15
Add to cart
-
Bolt Catch Plunger
$3.75 $3.38
Add to cart
-
Flash Hider
$62.00 – $63.00
$55.80 – $56.70
Select options
This product has multiple variants. The options may be chosen on the product page
-
Straight Drop-In Trigger
$199.00 $179.10
Add to cart
-
AR15 Ejector
$4.70 $4.23
Add to cart
-
Low Profile Selector Cap
$21.00 $18.90
Add to cart
-
Gen 4 Bolt Catch
$16.00 $14.40
Add to cart
-
Snapback Hat
$17.00
$15.30
Select options
This product has multiple variants. The options may be chosen on the product page
-
12.5 Revolution PD Upper
$1,909.00 – $1,998.00
$1,718.10 – $1,798.20
Select options
This product has multiple variants. The options may be chosen on the product page
-
13.75 Revolution PD Upper
$1,998.00 – $2,086.00
$1,798.20 – $1,877.40
Select options
This product has multiple variants. The options may be chosen on the product page
-
20 Revolution PD Upper
$1,983.00 – $2,071.00
$1,784.70 – $1,863.90
Select options
This product has multiple variants. The options may be chosen on the product page
-
16.5 Revolution PD Upper
$1,909.00 – $1,998.00
$1,718.10 – $1,798.20
Select options
This product has multiple variants. The options may be chosen on the product page
-
Dictator Maintenance Kit
$31.00 $27.90
Add to cart
-
Revolution Ejector
$8.45 $7.61
Add to cart
-
Picatinny Buffer Tube Adapter Kit
$130.00 $117.00
Add to cart
