your search didn't produce any results

Muzzle Brake Lock Nut

June 4, 2020

Our collar jam nuts are specifically designed to relieve unnecessary stress on the barrel. Simply tighten any muzzle device against this jam nut without the use of shims or crush washers. They are available in 1/2x28 or 5/8x24 thread pitchs.

Muzzle Device Crush Washer

September 23, 2024

Use these washers to install your favorite flash hider, muzzle brake, or any other muzzle device that needs to be installed on your threaded barrel.

Nylon Tension Screw

June 4, 2020

These screws allow you to fine tune the fitment of your firearm's upper and lower receiver. All Gen 4 Lower Receivers, P-15 Lower Receivers, Phoenix Lower Receivers, and Rogue Upper Receivers come with these screws pre-installed.

P415 Op-Rod

June 4, 2020

OEM replacement gas piston operating rods. These rods are manufactured out of H13 steel for strenght and are available in Mid-length (10.395"), Carbine Length (8.385"), and PDW-Length (5.365").

Pistol Buffer Tube

July 28, 2022

Our billet machined Buffer Tube uses “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube. These extensions prevent carrier-tilt and doubles as a lock that stops the buffer tube from rotating.

Pistol Grip Rail Attachment

November 2, 2021

Our pistol grip rail attachment is fully M-LOK® compatible. Add this mount to any M-LOK® compatible rail, to conveniently install your favorite pistol grip for use as a vertical forward grip.

Pistol Grip Screw

September 20, 2024

This screw can be used for a new build or as a replacement for any OEM flat head screw. It features 1/4-28 x .75" threads and a Button Head Hex Sockett Cap.

Piston Upper Receiver Screws

June 4, 2020

Gas Piston Upper Receiver Screws are 8-32x.375 flat head torx screws. Used to secure Edges Handguards to all POF-USA Gas Piston Upper Receivers and used attach the Tombstone Handguard to the Tombstone Receiver.

Pivot Pin

June 4, 2020

This pin keeps the upper and lower together, while acting as a hinge to open the action. We offer two different sizes. One for our AR-15 type firearms and one that fits all P-308 receivers, Rogue LMR receivers, Revolution CMR receivers, Phoenix PSG receivers, and P-SG 22 receivers.

POF USA Sling

June 4, 2020

This sling is an adjustable 2-point sling that comes with (2) Heavy Duty QD Swivel Mounts. It is constructed of durable 1″ Black Nylon Webbing and features a pull tab for quick adjustments.

PST QD Flash Hider

January 5, 2026

The PST QD 3-Prong Flash Hider is a lightweight suppressor mounting option with repeatability and a solid return to zero mounting system. Manufactured out of QPQ Salt Bath Nitrided 4140 CrMoV steel for hardness and corrosion resistance, this Flash Hider features a tapered shoulder, reverse mounting threads, and detuned prongs so that this flash hider won't resonate when fired or banged around.

PST QD Muzzle Brake

January 12, 2026

The PST-QD 2-Port Muzzle Brake is a lightweight suppressor mounting option with repeatability and a solid return to zero mounting system. Manufactured out of QPQ Salt Bath Nitrided 4140 CrMoV steel for hardness and corrosion resistance, this brake features 2-port to help reduce recoil.

PST QD Shim Kit

January 5, 2026

The PST QD Muzzle Device Shim Kit is composed of ten total shims for timing any PST-QD Muzzle Device. This kit including: 4 thin shims (.004” thickness), 5 medium shims (.006” thickness), and one thick shim (.060” thickness). The shims can be identified via the notches on the internal diameter.

QD End Plate

June 4, 2020

The Quick Detach End Plate is a low-profile sling mount that does not interfere with the stock when fully collapsed. It features an anti-rotational sling swivel attachment. This allows the operator to focus on the target and not on untangling themselves from their sling.

QD Locking Lug

June 4, 2020

OEM replacement quick detach locking lug for POF-USA rails systmes. Intended for use with POF-USA Renegade rail systems and POF-USA Edge rail systems only.