your search didn't produce any results
10.5 Renegade Plus 300BLK Upper
June 4, 2020
When we decided to make a 300 Blackout Upper, it couldn’t be another “me-too” upper receiver. The Renegade + 300 Blackout Upper embodies everything a direct impingement AR can be. Put simply, the Renegade Plus addresses all of the weak points of the direct impingement system.
read more
10.5 Renegade Upper - 5.56 NATO
November 5, 2024
The Renegade + upper addresses weak points of the direct impingement (DI) system. Platform advancements such as our roller cam pin and heat sink barrel nut go above aesthetics often found in DI uppers today. The Dictator gas block gives you control of your gas system when tuning for suppressor use.
read more13.75 Renegade + Upper - 5.56 NATO
November 5, 2024
The Renegade + upper addresses weak points of the direct impingement (DI) system. Platform advancements such as our roller cam pin and heat sink barrel nut go above aesthetics often found in DI uppers today. The Dictator gas block gives you control of your gas system when tuning for suppressor use.
read more16.5 Renegade Plus Upper - 5.56 NATO
June 4, 2020
The Renegade + upper addresses weak points of the direct impingement (DI) system. Platform advancements such as our roller cam pin and heat sink barrel nut go above aesthetics often found in DI uppers today. The Dictator gas block gives you control of your gas system when tuning for suppressor use.
read moreA2 Flash Hider
July 2, 2024
Factory replacement Flash Hider. These muzzle devices are available in either 1/2x28 or 5/8x24 thread pitch. Mounted to the muzzle of a firearm, it helps to reduce the amount of light emitted from the barrel during ignition.
read moreAR Barrels
June 4, 2020
Our 4150 chrome vanadium steel barrels feature 5R rifling and nitride heat treating for increased surface hardness and corrosion resistance. You can expect extractor life to drastically increase due to Patented E² extraction technology.
read moreAR15 Bolt Assembly
June 4, 2020
Our nickel plated AR-15 bolt assembly is manufactured to MIL-SPEC and is ready for any AR-15/M16 carrier. In addition to being compatible with both piston and DI rifles, it comes with the extractor and ejector installed.
read moreAR15 Ejector
June 4, 2020
OEM replacement AR-15 Ejector. This ejector will fit all Mil-spec 5.56 NATO bolts, 7.62X39 bolts, 6.8 SPC bolts, 300 Blackout bolts, 6MM ARC bolts, 350 Legend bolts, and .224 Valkyrie bolts. This part is not compatible with P-308 bolts or Revolution / Rogue bolts.
read moreAR15 Extractor Pin
June 4, 2020
OEM replacement AR-15 Extractor Retaining Pin. It is compatible with Mil-spec AR-15 bolts and extractors and Revolution / Rogue bolts and extractors. This part is not compatible with P-308 bolts.
read moreDictator Gas Flow Regulator
October 2, 2024
OEM replacement gas regulator. This part is recommended for Dictator annual maintenance. Choose one of 9 gas positions to dictate the gas pressure and cyclic rate read moreDictator Maintenance Kit
June 4, 2020
OEM gas block maintenance kit. This kit is recommended for all Dictator Gas Block annual maintenance. It includes two regulator detent ball bearings, two regulator detent springs, two dowel pins, and a new gas regulator. read moreDictator Regulator Detent
October 2, 2024
OEM replacement ball bearing. This part is recommended for Dictator annual maintenance. Choose one of 9 gas positions to dictate the gas pressure and cyclic rate. read moreDictator Regulator Detent Spring
October 2, 2024
OEM replacement spring. This part is recommended for Dictator annual maintenance. Choose one of 9 gas positions to dictate the gas pressure and cyclic rate read moreDictator Straight Gas Tube
July 2, 2024
The Dictator features a straight tube, but why? The advantage of a Stainless-Steel Straight Tube is that we eliminate the heat buildup that exists at the bent portion of mil-spec tubes. This is important for suppressed rifles which are subject to very high heat levels.
read moreEjection Port Cover
June 4, 2020
Our OEM port cover assemblies come laser marked with the U.S. Flag and God Bless America or the U.S. Flag and Frank was here logo. Two lengths available, one for Mil-spec AR-15 pattern upper receivers and one for AR-10/SR25 pattern upper receivers.
read moreEjection Port Cover E-Clip
June 4, 2020
OEM replacement dust cover E-Clip. Sold in Quantities of 3 per package. It is compatible with all P-415 Edge upper receivers, Minuteman, Wonder, & Renegade upper receivers, P-308 upper receivers, Revolution PD & Revolution DI upper receivers, and Rogue upper receivers.
read more
Renegade Plus Upper Parts
POF-USA has Renegade Plus upper parts and components in stock to keep your rifle in tip top shape. From charging handles to muzzle brakes, check out the Patriot Store for your next build.
Showing 1–16 of 58 results
-
10.5 Renegade Plus 300BLK Upper
$1,263.00 – $1,351.00
$1,073.55 – $1,148.35
Select options
This product has multiple variants. The options may be chosen on the product page
-
10.5 Renegade Upper - 5.56 NATO
$1,263.00 – $1,351.00
$1,073.55 – $1,148.35
Select options
This product has multiple variants. The options may be chosen on the product page
-
13.75 Renegade + Upper - 5.56 NATO
$1,337.00 – $1,425.00
$1,136.45 – $1,211.25
Select options
This product has multiple variants. The options may be chosen on the product page
-
16.5 Renegade Plus Upper - 5.56 NATO
$1,263.00 – $1,351.00
$1,073.55 – $1,148.35
Select options
This product has multiple variants. The options may be chosen on the product page
-
A2 Flash Hider
$15.00
$12.75
Select options
This product has multiple variants. The options may be chosen on the product page
-
AR Barrels
$124.00 – $260.00
$105.40 – $221.00
Select options
This product has multiple variants. The options may be chosen on the product page
-
AR15 Bolt Assembly
$86.00 $73.10
Add to cart
-
AR15 Ejector
$4.70 $4.00
Add to cart
-
Dictator Gas Flow Regulator
$24.00 $20.40
Add to cart
-
Dictator Maintenance Kit
$31.00 $26.35
Add to cart
-
Dictator Regulator Detent
$3.25 $2.76
Add to cart
-
Dictator Regulator Detent Spring
$3.25 $2.76
Add to cart
-
Dictator Straight Gas Tube
$24.00 – $33.00
$20.40 – $28.05
Select options
This product has multiple variants. The options may be chosen on the product page
-
Ejection Port Cover
$13.00
$11.05
Select options
This product has multiple variants. The options may be chosen on the product page
-
Ejection Port Cover E-Clip
$3.50 $2.98
Add to cart
