 |
|
P.O.F-USA has
engineered, manufactured and tested this system. We are
extremely proud of the durability and performance of the
P-415 / P-416 Gas-Piston uppers. We have eliminated features
of the Gas Operating System such as gas-rings, gas tube, gas
key. The P-415 / P-416 Gas-Piston system also eliminates
Heat, Carbon build up and Gas Leaks which can have an
adverse effect on the operating system. The biggest issue
being "HEAT". A weapons first priority, must be
"RELIABILITY".
We first displayed our gas piston uppers at the 2004 Shot
Show. We have engineered the entire system using standard
"AR15/M16" style parts such as the flat top receiver and
bolt. We add only three additional parts to operate our gas
piston uppers (Gas plug, Gas piston, and push rod). All
uppers come standard with C.R.O.S ™ (Corrosion Resistant
Operating System), which allows our weapon system to operate
without the need of lubricant. |
POF-USA
P-416-16-BP-223
(P-416 FULL-AUTO 16" UPPER, W/FLUTED
BARREL, |
M4 HAND GUARDS)
$1,050.00
All POF-USA Barrel
Assemblies are "Made to Order".
Due to current demands, please allow approximately
12-14 weeks for delivery.
NOTE: Short barreled Upper Receiver/Barrel Assembly is
legal for
installation only on registered full-automatics,
weapons registered as
Short Barreled Rifles or Pistols.
Full-auto and short barreled upper assemblies are not for sale in
CA, WA, etc... Any state that have restrictions on full-auto and short
barrel upper assemblies are "restricted sales", and will only be sold to
LEO and Military agencies in state's that restrict these items. |
|
|
Information and Specifications: |
Barrel:
16" Heavy contour, Fluted to reduce
weight and Heat
4150 Mil-B-1159F Vanadium Alloy (machinegun rated)
70 Rockwell case hardened heat treated "5R" polygonal
barrels are 2X harder then Mil-Spec & Hammer Forged barrels
Corrosion resistant
and 10 times thicker and hardness than mil-spec chromed
lining
"5R" Polygonal Rifled barrels from Rock
Creek Barrels, Inc.
A2 Flash hiders
Chamber: 5.56 mm Nato (.223 Cal.)
Method of Operation:
Gas Piston operated, rotating bolt (short stroke system)
Reversible piston / gas trap design (two modes of fire)
C.R.O.S. (Corrosion Resistant Operating System):
Chrome plated: Barrel, Gas Block/Tube (billet
machined), Gas Plug (billet machined), Gas
Piston (billet machined), Bolt Carrier Assembly (one piece
billet machined), Silicone Nickel plated A3 Flattop Upper
Receiver and Charging Handle.
OUR
GAS PISTON WEAPON SYSTEMS
REQUIRING NO LUBE!
Bolt & Carrier:
Chrome plated 8620 Integral Keyed Steel Bolt Carrier (billet
machined), heat treated / plated
per Mil Spec.
Chrome plated Bolt, heat treated, to Mil-spec
Sights:
Fixed Removable FTA-2005 Hooded, Snag Free Front Site Assemble
Troy flip up rear site (optional)
Weight:
Empty – 4.6 Lbs (UPPER) |
Upper Receiver:
A3 Flattop, Forged 7075-T6 aircraft aluminum alloy
A3 Flattop: Silicone Nickel Plated (Interior only)
Charging handle:
Silicone Nickel Plated (Interior only) & Black
Hard coat Anodized per Mil Spec and Teflon coated black
Handguards:
Mil-Spec Barrel Nut
Sling mount
M4 Plastic Hand Guards
POF-USA Specifications:
All raw materials are manufactured from US Steel Mills.
All heat treats, plating/coatings, are completed by U.S.A.
owned and operated manufacturers.
All accessory and component parts on our weapons systems are
from U.S.A. owned and operated manufacturers.
All of our weapon systems are 100% pure American made. |
|
|
Our
Gas-Piston uppers are extremely easy
to clean and maintain, because all parts are hard chrome plated STANDARD.
Our barrel designs reduce
heat and weight, and our "Patented" over sized barrel nut design provides
strength, rigidity, and works as a heat sink to
reduce heat. |
|
 |
|
|
Our gas piston upper with Factory Barrel
Nut & M4 hand guards.
|
|
Under rigorous testing
the P-415 / P-416 has survived the harshest of environments. The P-415 /
P-416 incorporates a gas-trap system. The rugged billet look bolt
carrier is the heart of the P-415 / P-416. No tools are required to
disassemble the P-415 / P-416, a simple cartridge is all that needed.
Simply turn the gas-plug 90° to remove and clean the gas-piston and
re-assemble. Remove the bolt carrier assembly, wipe down, put light oil
on the carrier, and re-assemble. Our gas piston design also eliminates
the chance of losing your optics zero, since we don't have to remove the
hand guard for maintance of the gas piston. The P-415 / P-416 recoil is
reduced, allowing for smoother and more accurate operation. The P-416
system operates at a slower cycle rate of fire in full-auto which makes
the weapon more reliable, controllable, and accurate.
The best part of
our gas piston system it eliminates HEAT, and is very RELIABLE. |
|
|
|
 TERMS and
CONDITIONS
Pre Ban rifles and high capacity magazines are
unavailable in the following states: California, Hawaii, Maryland,
Massachusetts, New Jersey & New York.
All purchases requiring FFL dealer must provide us a fax copy of FFL license
number. Fax your FFL license number to
623-321-1680. No exceptions.
Receivers available at this site are for sale to FFL dealers only. There are
no exceptions. Funds must be paid for by an FFL dealer.
Failure to provide us proper documentation will result
in rejecting your
order.
ATTENTION: POF-USA
will only ship Firearms to a licensed FFL holder. If you
do not have an FFL (Federal Firearms License) you will
need to find a licensed firearms dealer to do the
transfer for you. You must enter the FFL licensed
dealer's address as the shipping address when you place
your order with us.
FFL means Federal Firearms License. This is issued by
the BATF to those who deal in firearms. It is illegal to
deal in firearms without an FFL documentation. An FFL is
required in order to receive a gun delivered to you
through the mail. We require a signed hard copy or a
legible fax on file in order to send a gun to the
licensee. |
WARRANTY TERMS
Three Year Limited
Warranty
This POF-USA Patriot Ordnance Factory, Inc. firearm is
warranted to the original retail customer for three
years from the date of purchase against defects in
material and workmanship. All parts and labor or
replacement at our option are covered.
Shipping to and from our repair facilities, government
fees, damage caused by failure to perform normal
maintenance, sales outside the United States, damage due
to high velocity, high pressure, reloaded, or other
non-standard ammunition, or any unauthorized repair,
modification, misuse, abuse, or alteration of the
product is not covered by this limited warranty.
Any implied warranties, including the implied warranties
of merchantability and fitness for a particular purpose,
are limited to one year from date of purchase.
Consequential or incidental damages and/or expenses, or
any other expenses are not covered by this warranty.
To obtain warranty performance please call or email to
obtain a return authorization number. You must download
the return form complete it and include with your
shipment.
Alterations & Modifications Warning
Altering or modifying parts is dangerous and will void
the warranty. This POF-USA rifle was manufactured to
perform properly with the original parts as designed. It
is your duty to make sure any parts you buy are made for
this rifle and are installed correctly and that neither
the originals nor the replacements are altered or
changed. Your POF-USA rifle is a complex precision tool
with many parts that must relate correctly with other
parts in order for proper and safe operation. Putting a
rifle together wrong or with incorrect or modified parts
can result in a damaged rifle, serious personal injury
or death to you and others through malfunction. Always
have a qualified gunsmith work on your rifle or at least
check any work not performed by a gunsmith. |
| |
|
 |
|
